JET 708598K JSG-6CS 6-Inch 12-Inch 1-1 2...

Belt operates horizontally, vertically, or at any angle in between. Positive settings at 90 and 45 degrees. Quick- change belt tension lever facilitates fast belt changes. Belt tracking adjustments are easily made with exclusive dual thumb screws. Belt guard is designed to allow full use of the belt length. Two ground cast-iron tilting tables with miter gauge slots. Large 12-1/2-by-7-inch belt table and 16-1/2-by-10-inch disc table. Features 1-1/2 hp, 1-phase 115/230-volt motor, pre-wired 115-volt, produces 2,500 sfpm. Comes standard with back stop for horizontal mode, miter gauge, sanding belt, sanding disc, and 4-inch dust chute.

FEATURES

• Belt sander operates horizontally and vertically and can be locked at any angle in between
• Both sanding tables have positional stops at 90 degrees and 45 degrees for quick reference
• Belt tracking adjustments are easily made with exclusive dual thumb screws
• The belt guard is designed to allow the full usage of the 6" belt width and length
• Two precision ground cast iron tables with mitre gauge slots
• Exclusive design single 4" dust port base which efficiently collects the majority of the dust produced by both sanders before it becomes airborne

STANDARD EQUIPMENT

• Back stop for horizontal mode
• Mitre gauge
• Sanding belt
• Sanding disc
• 4" dust chute

SPECIFICATIONS
Sanding Belt (WxL/in): 6 x 48
Disc (Dia/in): 12
Belt Table Tilt (Down, Up): 45 degrees, 20 degrees
Disc Table Tilt: 45 degrees, 25 degrees
Motor: 1 1/2 HP, 1 Ph 115/230V Prewired 115V
Belt Speed (SFPM): 2,500
Net Weight (lbs): 210